For vehicles with the original front disc brake
2 Brake disc for vehicles with original Bedford disc brake
Attention, the discs fit only with conversion kit BTS 80188
Diameter 270 mm, thickness 14.3 mm
Adapter wheel hubs for brake disc BTS80153
For vehicles that have the original Bedford disc brake installed.
With this you can install the brake disc BTS80153.
The calipers and pads can continue to be used.
Everything is delivered what you need for the conversion, see pictures.
With detailed installation instructions in German.
Front right brake caliper.
As a spare part for the BTS 80189 conversion kit
Or as a spare part for vehicles with factory-installed disc brakes.
Attention, the safety screws BTS 80674 must also be used, as there is no thread in the brake calipers
Front left brake caliper.
As a spare part for the BTS 80189 conversion kit
Or as a spare part for vehicles with factory-installed disc brakes.
Attention, the safety screws BTS 80674 must also be used, as there is no thread in the brake calipers
Brake blocks front
Mounting screw with nut for brake calliper BTS 80553/54.
The new brake calipers do not have an internal thread, which is why it is essential to install suitable safety screws.
Two sets are required per brake caliper.
Repair kit for front brake caliper
for vehicles with original disc brakes and for the
Retrofit kit BTS 80189.
Piston diameter 57mm
Complete for a brake caliper.
Brake blocks front assembly set