Engine


Short engine 2.3 L overhauled
Pistons have new piston rings, no running marks in the cylinders, the traces of honing are still visible, bearing shells and crankshaft in very good condition, all seals at the bottom are new, completely sealed, can be installed that way. The seals for the oil pump and oil filter flange are included.

SKU:
BTS80695
Item weight:
100,00 kg
800,00 € *
Low stock level
Delivery time: 0 Workdays
Complete side shaft with bearing shells, cover plate, retaining clip and toothed belt wheel.
Used but good condition.
You can borrow tools for installing and removing bushings here
SKU:
BTS80596
Item weight:
2,60 kg
70,00 € *
Available immediately
Delivery time: 0 Workdays

Short engine 2.3 L.
Pistons are at the wear limit, no run-in marks in the cylinders, the marks from honing are still visible, bearing shells are worn, crankshaft is OK, no run-in marks and within tolerance. Ideal block to convert an engine, e.g. after a piston seizure.
Side shaft is installed. Oil pan is also included.

SKU:
BTS80694
Item weight:
100,00 kg
150,00 € *
Currently out of stock

Cylinder head 2.3 and 1.8 liter petrol engine, completely overhauled.
Milled valve seats, planned head, 0.5 mm thinner, thus slightly higher compression
All valves reground, shafts have no play, shaft seals new
Sealing ring new, small rear seal new.
All gaskets for assembly are included in the scope of delivery, with the exception of the head gasket, please order separately
The supplied intermediate seal must be used both as it is thicker than normal.
All valves are set, so do not mix up the tappets during assembly.
The valves can all still be readjusted, no adjusting screw is at the end
All threads in the head are OK, the camshaft has not run in.

SKU:
BTS80528
Item weight:
30,00 kg
599,00 € *
Available immediately
Delivery time: 0 Workdays

Empty cylinder head for 2.3 and 1.8 liter petrol engines, overhauled.
Valve seats all milled to size
Planed head, 0.5 mm thinner, resulting in slightly higher compression
Shafts have no play, all bores and threads are ok

SKU:
BTS80714
Item weight:
20,00 kg
249,00 € *
Available immediately
Delivery time: 0 Workdays

Flywheel mass with gear rim
2,3 Ltr engine up to year 84
Good condition, spider in good order, no grooves in the grinding surface of the Clutch.

SKU:
BTS80722
Item weight:
11,00 kg
59,00 € *
Available immediately
Delivery time: 0 Workdays

Used camshaft box with camshaft
New rear seal and new oil seal installed.
All screw holes and studs are OK.

SKU:
BTS80507
Item weight:
10,00 kg
99,00 € *
Low stock level
Delivery time: 0 Workdays

Fan blades used for the 1.8 and 2.3 liter gasoline engine,
good condition, no cracks,

SKU:
BTS80515
Item weight:
0,50 kg
20,00 € *
Currently out of stock

Inlet valve 1,8 & 2,3 Ltr. petrol engine
Used, but in good condition.
Standard dimensions, all checked and measured

SKU:
BTS80719
Item weight:
0,20 kg
19,90 € *
Available immediately
Delivery time: 0 Workdays
tappet without adjusting screw
Used but good condition.
SKU:
BTS80607
Item weight:
0,20 kg
14,99 € *
Available immediately
Delivery time: 0 Workdays

Items 1 - 10 of 10