Engine
Used crankshaft only for vehicles with manual transmission.
When used for automatic gearboxes, the bore at the end of the gearbox must be bored out from 21 to 23 mm.
Incl. bearing shells for main and connecting rod bearings.
You can see that the bearing shells have already run, but they are still good for the next 100000 km.
Used but in good condition.
Used but good condition.
You can borrow tools for installing and removing bushings here
Empty cylinder head for 2.3 and 1.8 liter petrol engines, overhauled.
Valve seats all milled to size
Planed head, 0.5 mm thinner, resulting in slightly higher compression
Shafts have no play, all bores and threads are ok
Flywheel mass with gear rim
1,8 Ltr engine up to year 84
Good condition, spider in good order, no grooves in the grinding surface of the Clutch.
Flywheel mass with gear rim
2,3 Ltr engine up to year 84
Good condition, spider in good order, no grooves in the grinding surface of the Clutch.
Manifold plate for intake preheating 1.8 and 2.3 litre petrol engines
Good condition, no cracks,
Fan blades used for the 1.8 and 2.3 liter gasoline engine,
good condition, no cracks,
Exhaust valve 1,8 & 2,3 Ltr. petrol engine
Used, but in good condition.
Standard dimensions, all checked and measured
Installation wedge for valves 1,8 & 2,3 Ltr. petrol engine
Used but in good condition.
Inlet valve 1,8 & 2,3 Ltr. petrol engine
Used, but in good condition.
Standard dimensions, all checked and measured
Used oil dipstick 1,8 and 2,3 Ltr petrol engine
Valve spring set for exhaust valves 1,8 & 2,3 Ltr. petrol engine
Used but in good condition.
Two springs and the spring cover
Valve spring set for inlet valves 1,8 & 2,3 Ltr. petrol engine.
Used but in good condition.
Two springs and the spring cover
