rear axle

shock absorber rear reinforced

all models

1 set of bushings for a shock absorber rear top and bottom

4 rubbers

all models

wheel bolt

These wheel studs are no longer available, comparison studs can be found HERE

Mod.97100/97300 up to build year 84 up to chassis number EV613000
Mod. 97500  up to build year 83 up to chassis number DV 611440

Wheel studs new version with nut, metric thread M 12 X 1.5

as a replacement for the old wheel studs in inch thread which are unfortunately no longer available.

The bolts fit exactly, just knock out the old bolts and pull in the new ones.

97100/300 CF 230/250 up to year of construction 84 up to chassis number EV613000
97500 CF 280 up to year of construction 83 up to chassis number DV611440

Additional springs at the rear of all models

Ideal for Hymermobile to relieve the normal springs
the vehicle is straight again and does not look overloaded.
The spring comfort is maintained, all parts are screwed and
can be installed without a lift, only with a jack.

Assembly kit for the rear axle consisting of
2 x high quality elaston standard springs
2 x holding plates above
2 x counter plates below
2 x brackets
4 x lock nuts
4 x countersunk screws, inch thread
4 x M8 countersunk screws
Installation instructions in German

wheel bearing kit  rear CF 230/97100

weight  72x32x25mm

shrink ring for wheel bearing   rear CF 230/97100

31,8mm inside diameter

wheel bearing kit  rear CF 250/280/97300/97500

weight  80x35x27

wheel nut for the normel wheel not for dual wheels
7/16 x 20 inch

wheel nut chrome

7/16 x 20

shrink ring for wheel bearing   rear CF 250/280/9730097500

34,8mm inside diameter

Rear wheel bearing seal

If the rear wheel bearings are leaking, you can change the oil seals on the inside.

For rear wheel bearing set CF 250/280/97300/97500

wheel bearing kit  rear CF 350/97700

all years of construction with dual wheels

Bolt to weld on rear axle for the rear shocker down

locking plate full-floating axle 

all years of construction with dual wheels

Seal ring half shaft

CF 350

all years of construction with dual wheels

88,9 x 60,32 x 12,7mm

O-Ring for wheel bearing kit  rear CF 230/97100

O-Ring for wheel bearing kit  rear CF 250/280/97300/97500

Bolt for REAR SPRING BUSH

1/2 Inch fine thread

with ring washers and nut

CF 230/250/280

97100/97300/97500

all years of construction

Stop nut for mounting bracket leaf spring on the rear axle
CF 280 and 350
Thread 1/2 UNF
for bracket diameter approx.12.4mm
Wrench size 19mm